Advertisement
Memory Allocation
Data Treatment
Communication
Thermo Fisher Scientific
The Memory Allocation Percent screen is used to select the percentage of
each record type for both short records and long records. Percentages
Percent
between 0 and 100% are available in increments of 10. Changing this value
results in log erasure for both short records and long records.
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Configure Datalogging > Memory Allocation %.
The Data Treatment screen is used to select the data type for the selected
record: whether the data should be averaged over the interval, the
minimum or maximum measured during the interval, or the current value
(last value measured). Data treatment doesn't apply to all data, just to the
concentration measurement. All other data points log the current value at
the end of the interval.
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Configure Datalogging > Data Treatment.
The Communication Settings menu is used with communications control
and configuration.
Settings
In the Main Menu, choose Instrument Controls > Communication
●
Settings.
SET PERCENT LRECS:
CURRENTLY:
SET TO:
CHANGE VALUE
RANGE
AVG
DIAGS ALARM
SET LREC DATA TYPE:
CURRENTLY:
AVG
SET TO:
CUR ?
CHANGE VALUE
RANGE
AVG
DIAGS ALARM
50%
60% ?
SAVE
SAVE
Model 48i Trace Level-Enhanced Instruction Manual
Operation
Instrument Controls Menu
3-31
Advertisement
Troubleshooting
