Thermo Scientific 49i Instruction Manual page 20

Preface
Safety and Equipment
Damage Alerts
xx Model 49i Instruction Manual
• Appendix B "C-Link Protocol Commands" provides a description of the
C-Link protocol commands that can be used to remotely control an
analyzer using a host device such as a PC or a datalogger.
• Appendix C "MODBUS Protocol" provides a description of the
MODBUS Protocol Interface and is supported both over RS-232/485
(RTU protocol) as well as TCP/IP over Ethernet.
• Appendix D "Geysitech (Bayern-Hessen) Protocol" provides a
description of the Geysitech (Bayern-Hessen) Protocol Interface and is
supported over RS-232/485 and TCP/IP over Ethernet.
Safety
Review the following safety information carefully before using the analyzer.
This manual provides specific information on how to operate the analyzer,
however if the analyzer is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
This manual contains important information to alert you to potential safety
hazards and risks of equipment damage. Refer to the following types of
alerts you may see in this manual.
Safety and Equipment Damage Alert Descriptions
Alert
DANGER
WARNING
CAUTION
Equipment Damage
Description
A hazard is present that will result in death or serious
personal injury if the warning is ignored.
A hazard is present or an unsafe practice can result in
serious personal injury if the warning is ignored.
The hazard or unsafe practice could result in minor to
moderate personal injury if the warning is ignored.
The hazard or unsafe practice could result in property
damage if the warning is ignored.
Thermo Fisher Scientific