Thermo Scientific 49i Instruction Manual page 73

Analog Inputs
Thermo Fisher Scientific
• Use and
• Press to select a new choice.
OTHER MEASUREMENTS:
>NONE
INTENSITY A
INTENSITY B
NOISE A
NOISE B
FLOW A
FLOW B
RANGE AVG
PRESSURE
BENCH TEMP
LAMP TEMP
O3 LAMP TEMP
The Analog Inputs screen allows the user to select the output signal (none
or analog inputs 1-8) that is tied to the selected field item. The selected item
is shown by "<--" after it. Note that at this point, pressing
that these are proposed changes as opposed to implemented changes. To
change the selected record format and erase record log file data, see
"Commit Content" below.
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Select Content > Select Field > Analog Inputs.
• Use and
• Press to select a new choice.
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4
ANALOG IN 5
ANALOG IN 6
RANGE AVG
to move the cursor up and down.
DIAGS ALARM
to move the cursor up and down.
DIAGS ALARM
Model 49i Instruction Manual
Operation
Instrument Controls Menu
indicates
3-37