Thermo Scientific 49i Instruction Manual page 269

Thermo Fisher Scientific
lrec mem size
srec mem size
These commands report the long and short records that can be stored with
the current settings and the number of 2K blocks reserved for long and
short records. The example that follows shows the maximum number of
long records that can be stored based on allocated memory and content.
Send: lrec mem size
Receive: lrec mem size 1426 recs, 7 blocks
lrec per
srec per
These commands report the long and short records logging period. The
example that follows shows that the short record logging period is 5
minutes.
Send: srec per
Receive: srec per 5 min
set srec per value
set srec per value
value = | 1 | 5 | 15 | 30 | 60 |
These commands set the long and short records logging period to value in
minutes. The example that follows sets the long record logging period to 15
minutes.
Send: set lrec per 15
Receive: set lrec per 15 ok
no of lrec
no of srec
These commands report the number of long and short records stored in the
long and short records memory. The example that follows shows that 50
long records have been stored in the memory.
Send: no of lrec
Receive: no of lrec 50 recs
malloc lrec
malloc srec
These commands report the currently set memory allocation for long and
short records in percent of total memory.
Send: malloc lrec
Receive: malloc lrec 10%
C-Link Protocol Commands
Datalogging
Model 49i Instruction Manual B-21