System Description
I/O Components
Ethernet Connection
External Accessory
Connector
8-12
Model 49i Instruction Manual
An RJ45 connector is used for the 10Mbs Ethernet connection supporting
TCP/IP communications via standard IPV4 addressing. The IP address may
be configured for static addressing or dynamic addressing (set using a
DHCP server).
Any serial port protocols may be accessed over Ethernet in addition to the
serial port.
The external accessory connector is not used in the Model 49i analyzer.
This port is used in other models to communicate with smart external
devices that may be mounted hundreds of feet from the analyzer using an
RS-485 electrical interface.
Thermo Fisher Scientific