(0X03/0X04) Read Holding Registers / Read Input Registersc-5 - Thermo Scientific 49i Instruction Manual

Uv photometric o3 analyzer
Table of Contents

Advertisement

(0x03/0x04) Read Holding
Registers / Read Input
Thermo Fisher Scientific
Response
Field Name
Function
Byte Count
Outputs status 2-10
Outputs status 11-15
The status of outputs 2–10 is shown as the byte value 0xCD, or binary
1100 1101. Output 10 is the MSB of this byte, and output 2 is the LSB. By
convention, bits within a byte are shown with the MSB to the left, and the
LSB to the right. Thus the outputs in the first byte are '10 through 2', from
left to right. In the last data byte, the status of outputs 15-11 is shown as the
byte value 0x0A, or binary 0000 1010. Output 15 is in the fifth bit position
from the left, and output 11 is the LSB of this byte. The four remaining
high order bits are zero filled.
Read holding/input registers reads the measurement data from the
instrument. Issuing either of these function codes will generate the same
response. These functions read the contents of one or more contiguous
Registers
registers.
These registers are 16 bits each and are organized as shown below. All of the
values are reported as 32-bit IEEE standard 754 floating point format. This
uses 2 sequential registers, least significant 16 bits first.
The request specifies the starting register address and the number of
registers. Registers are addressed starting at zero. Therefore registers
numbered 1–16 are addressed as 0–15. The register data in the response
message are packed as two bytes per register, with the binary contents right
justified within each byte. For each register, the first byte contains the high
order bits and the second contains the low order bits.
Request
Function code
Starting Address
Quantity of Registers
(Hex)
0x01
0x03
0xCD
0x0A
1 Byte
0x03 or 0x04
2 Bytes
0x0000 to maximum allowed by instrument
2 Bytes
1 to maximum allowed by instrument
MODBUS Protocol
Function Codes
Model 49i Instruction Manual
C-5

Advertisement

Table of Contents
loading

Table of Contents