Thermo Scientific 49i Instruction Manual page 82

Operation
Instrument Controls Menu
RS-232/RS-485 Selection
RS-232/RS-485 SELECTION:
XXXXXX** WARNING
DISCONNECT THE
CABLES BEFORE CHANGING
THE
RANGE
TCP/IP Settings
3-46 Model 49i Instruction Manual
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4
ANALOG IN 5
ANALOG IN 6
RANGE
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
Note Disconnect the serial cable before changing RS-232 and RS-485
selection to prevent damage to the connected equipment.
• In the Main Menu, choose Instrument Controls > Communication
Settings > RS-232/RS-485 Selection.
• Press
• Use
**XXXXXXX
SERIALX X
SELECTION!XXXXXX
TO CONTINUE
AVG DIAGS ALARM
The TCP/IP Settings menu is used for defining TCP/IP settings
Note The instrument power must be cycled after this parameter has been
changed for the change to take effect.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings.
AVG DIAGS ALARM
to leave the warning screen and move to next screen.
to confirm and save the new selection change.
RS-232/RS-485 SELECTION:
CURRENTLY:
X MAKE SURE THAT THE
IS OFF: PRESS
RANGE
SET TO:
TO CONFIRM
TOGGLE VALUE
AVG DIAGS ALARM
Thermo Fisher Scientific
RS-232
RS-485 ?
CABLEXX