Thermo Scientific 49i Instruction Manual page 282

C-Link Protocol Commands
Hardware Configuration
B-34 Model 49i Instruction Manual
Table B-7. Contrast Levels, continued
Level Contrast Level
5 50%
6 60%
7 70%
8 80%
9 90%
10 100%
date
This command reports the current date. The example that follows reports
the date as December 1, 2004.
Send: date
Receive: date 12-01-04
set date mm-dd-yy
mm = month
dd = day
yy = year
This command sets the date of the analyzer's internal clock. The example
that follows sets the date to March 19, 2005.
Send: set date 03-19-05
Receive: set date 03-19-05 ok
set default params
This command sets all the parameters to their default values. This does not
affect the factory-calibrated parameters.
Send: set default params
Receive: set default params ok
Thermo Fisher Scientific