Contact Information; Alarms Menu - Thermo Scientific 49i Instruction Manual

Operation

Alarms Menu

Contact Information

Alarms Menu
3-72 Model 49i Instruction Manual
The Contact Information screen displays the customer service information.
• In the Main Menu, choose Diagnostics > Contact Information.
CONTACT INFORMATION:
CALL CENTER: 508-520-0430
WEB: WWW.THERMO.COM
RANGE AVG
The alarms menu displays a list of items that are monitored by the analyzer.
If the item being monitored goes outside the lower or upper limit, the status
of that item will go from "OK" to either "LOW" or "HIGH", respectively.
If the alarm is not a level alarm, the status will go from "OK" to "FAIL".
The number of alarms detected is displayed to indicate how many alarms
have occurred. If no alarms are detected, the number zero is displayed.
To see the actual reading of an item and its minimum and maximum limits,
move the cursor to the item and press
Items displayed are determined by the options installed. The zero or span
check is visible only if the zero/span check or auto calibration options are
enabled. The O lamp temperature and ozonator level 1, 2, 3, 4, and 5
3
checks are visible only if the ozonator option is installed. The motherboard
status, interface board status, and I/O expansion board status (if installed)
indicates that the power supplies are working and connections are
successful. There are no setting screens for these alarms.
• In the Main Menu, choose Alarms.
DIAGS ALARM
.
Thermo Fisher Scientific