Communication Settings; Serial Settings; Baud Rate - Thermo Scientific 42i Instruction Manual

Serial Settings

Thermo Fisher Scientific
In the Main Menu, choose Instrument Controls > Communication
●
Settings.
The Serial Setting submenu is used for serial communications control and
configuration.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Serial Settings.

Baud Rate

The Baud Rate screen is used to set the RS-232/RS-485 interface baud rate.
Baud rates of 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
are available. The analyzer's default baud rate is set to 9600 to provide
backwards compatibility with the older C-series analyzers.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Serial Settings > Baud Rate.
Data Bits The Data Bits screen is used to set the number of serial data bits to either 7
or 8 (default).

COMMUNICATION SETTINGS:

>SERIAL SETTINGS
INSTRUMENT ID
COMMUNICATION PROTOCOL
STREAMING DATA CONFIG
TCP/IP SETTINGS
RANGE AVG DIAGS ALARM
SERIAL SETTINGS:
>BAUD RATE
DATA BITS
PARITY
STOP BITS
RS-232/485 SEL
RANGE AVG DIAGS ALARM
BAUD RATE:
CURRENTLY:
SET TO:
 CHANGE VALUE
 SAVE VALUE
RANGE AVG DIAGS ALARM
Instrument Controls Menu
9600
8
NONE
1
RS-232
9600
19200 ?
Model 42i Instruction Manual
Operation
3-35