Table of Contents
Advertisement
Sirona Dental Systems GmbH
4
Installing the X-Ray Tube Assembly
5.
2.
2.
1.
Screw two Philips countersunk screws M5 into the
threaded holes.
ATTENTION
When screwing in, be sure the tube assembly can be insert-
ed into the slot all the way to the stop.
2.
Pull plug K3 down from the rotating ring and plug it in.
Engage x-ray tube assembly. Tighten 2 screws lightly.
3.
Screw in another two M5 countersunk screws for the x-
ray tube assembly.
Then tighten all four screws cross-wise!
4.
Thread cable through the two cable tie loops and affix.
Connect plugs K9 together.
5.
Attach cable lug with cable clip to support plate (2
screws).
60 82 064 D 3297
D 3297.031.01.04.02
3.
4.
K9
4 Installing the X-Ray Tube Assembly
3.
1.
1.
Installation material
9
Hide quick links:
Advertisement
Table of Contents
