Creating 3D X-Ray Images - Sirona Galaxis Operating Manual

Creating 3D X-ray images
Explanation
Required documentation
Creation
12
5

Creating 3D X-ray images

The 3D X-ray images are created via the SIDEXIS XG exposure readiness
function and managed in the SIDEXIS database parallel to other X-ray ima-
ges (IO "Intraoral", XP "Panoramic", XC "Ceph", etc.).
At the same time, the 3D X-ray images are stored on the
The operation of the GALILEOS X-ray device is explained in the
Operating Instructions"
The operation of SIDEXIS XG software is explained in the
rator's Manual"
.
1. Start SIDEXIS XG (see
2. Select a patient.
3. Press the 3D Scan button.
4. Press the release button.
After a few minutes, the icon for the 3D X-ray image is displayed on the SI-
DEXIS XG desktop.
The 3D X-ray image is now managed in the SIDEXIS database in the same
way as any other X-ray image.
CAUTION
X-rays
Make sure that all locally applicable radiation protection regulations are ob-
served! Also make sure that the application information provided in the
LILEOS Operating Instructions"
positioning and the start of exposure)!
Sirona Dental Systems GmbH
.
"SIDEXIS XG Operator's Manual"
is observed (especially regarding patient
D 3474.208.01.06.02 04.2010
Operator's Manual GALAXIS
"3D"
tab card.
"GALILEOS
"SIDEXIS XG Ope
-
).
"GA
-
61 23 488 D 3474