9S017: Test Step 13 - Sirona Orthophos XG 3D/Ceph Installation Manual

11 Initial startup
11.10 Service routines for startup
142
S017: Test step 13
11.10.3.9
Enable/disable the welcome screen
Selection field
01
* Factory setting
1. Call service routine S017.13 [ → 125].
 Once the service routine has been selected, the code for the
current setting is displayed in selection field 1.
2. Use arrow keys (A) to select the required setting in selection field 1
(see table).
 Once the required setting has been selected, the Memory key (B)
lights up.
3. Save the setting [ → 129].
4. Exit the service routine [ → 129].
Installation Manual ORTHOPHOS XG 3D / Ceph
Code Function
00 Welcome screen disabled
01 Welcome screen enabled*
Sirona Dental Systems GmbH
63 03 452 D3352
D3352.031.05.08.02 10.2015