Setup Menu - LeCroy Sierra M6-2 User Manual

Sierra Trainer Menus

Setup Menu

Update Sierra Device: See
Port Configuration: You can select different combinations of Trainer with Analyzer and
Jammer. When running two different applications on the ports, you must set the same
port configuration in both of them. See
describes possible configurations:
Note:
See "Multi‐Port Trainer Script Assignments to Links" on page
Display Options: Selects what information to display. See
Figure 5.3: Trainer Setup Menu
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
"Update Sierra Device" on page
Analyzer and Trainer on same port: You can generate initiator/target traffic and

also capture the traffic generated.
Analyzer and Trainer on same port, and Analyzer and Trainer on another port:

You can generate initiator/target traffic and also capture the traffic generated on
two ports.
Trainer on one port, and Analyzer on another port: Trainer is run on a port gen‐

erating initiator/target traffic and Analyzer is run on the other port capturing the
traffic.
Trainer and Jammer on same port: You can generate initiator/target traffic and

also inject errors on the traffic between initiator and target on the port.
263.
"Ports Configuration" on page
397.
"Display Options" on page
LeCroy Corporation
97. The following
450.
379