Table of Contents
Advertisement
LeCroy Corporation
Viewer Toolbar
The Viewer toolbar allows searching, filtering, collapsing/expanding, and data reporting.
.
216
The Search button opens the search dialog (see
The Filtering Setup button opens the Filter dialog (see
page
222) and allows you to specify the criteria for filtering the result.
The Enable Disable Filtering button toggles the result between a filtered and
unfiltered view (see
"Filtering" on page
The Filter Idle button toggles the display to show/hide idle packets (see
"Filtering" on page
222).
The Hide RRDY Primitives button toggles the display to show/hide RRDY
primitives (see
"Filtering" on page
The Hide Unassociated Traffic button toggles the display to show/hide
unassociated traffic (see
The Hide All Primitives button toggles the display to show/hide all primitives
(see
"Filtering" on page
ability to filter the PM primitives so you can find commands quicker.
The Expand/Collapse all Layers button expands or collapses Transport and
Application layers to simplify results display.
The down arrow on the Go To button allows location of cursors or specific
packets: Trigger Position, X Position, Y Position, Packet Number, Timestamp,
Bookmark, Begin, and End.
The Data Report button displays the data report.
222).
222).
"Filtering" on page
222).
222. Note: When capturing PM traces, you need the
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
"Search" on page
238).
"Filtering" on
Toolbars
Advertisement
Table of Contents
