Editing A Data Block - LeCroy Sierra M6-2 User Manual

LeCroy Corporation
Figure 2.155: Rename Data Block
Enter a descriptive name in the New Name edit box and click OK.

Editing a Data Block

You can enter data in the defined cell structure by these methods:
Define Your Own Pattern
To define a pattern:
1. Click Pattern to open the Define Pattern dialog box as shown in Figure 2.156
2. Enter a data pattern in the Data Pattern edit box.
3. Choose the number of times to repeat that pattern, and click OK.
Figure 2.156: Define Your Own Data Pattern
152
Define your own pattern

Set a counter

Choose a Random Pattern

Choose a Walking Bit Pattern

S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Exercise and Capture