Writable Buffer Size Field; Error Injection Tab - LeCroy Sierra M6-2 User Manual

Target and Device Emulation
Figure 2.167: SATA: Device Emulation Project Pages Tab
The Device Emulator pages open with default settings for each page. To change settings
for your application:
1. Set the Device Type of either ATA or ATAPI
2. Set values for each of the enabled (White) Value fields on the Identify page.
3. To reset the pages to the default settings, click the Default Settings button.
To use a previously defined emulation, click the Import button and select an emulation.

Writable Buffer Size Field

Writable buffer size field is about 3.5 GB.

Error Injection Tab

Clicking the Error Injection tab opens the General Errors dialog.
SAS: In addition to specifying general errors, you can also set errors for Identify,
Connection Management, and SAS Commands by clicking the corresponding icon in the
Errors window.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
163