Example 1: Creating A Single Event And Action That Removes A Primitive - LeCroy Sierra M6-2 User Manual

LeCroy Corporation

Example 1: Creating a Single Event and Action that Removes a Primitive

In this example, the Global Rules area of the scenario waits for each RRDY Normal
primitive from the initiator and removes it.
1. Click the New Scenario button in the main library or one of the device libraries.
2. In the Scenario Properties dialog, enter the scenario name, description, and
3. In the Global Rules area, click the prompt to add an event.
Figure 4.22: Example 1: Adding an Event
4. In the Type column of the Event Properties dialog, choose Primitive > SAS Primitive.
5. In the Type column in the middle of the dialog box, click Description if you want to
6. Click Direction to choose the direction of traffic to monitor for the selected event
7. Still in the middle column of the Event Properties dialog box, click Primitive to
342
direction of traffic change (see
The Event Properties dialog box appears (see
add a description of the event.
(the default is From Initiator, which is what you want for this example).
display a drop‐down menu that lets you choose the type of primitive for which you
want to wait in this scenario. In this example, it is RRDY (Normal).
Figure 4.15 on page 330).
Figure 4.17 on page
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Creating Global Rules
332).