Generation Options
Assigning an Action
After you have dropped the Event button in a cell in the Main Display area, you can assign
an action to the event.
Note:
If you do not assign an action to an Event button, the Generator ignores the event.
To assign an action to an Event button:
1. Right‐click the Event button to display a pop‐up menu.
Figure 5.21: Action Menu
2. Select Specify Action, and then choose an action from the submenu. The menu
Figure 5.22: Action in Main Display
Note:
You can also set actions within the Properties dialog for each event. Double‐click the Event
button to open the Properties dialog, then select the Actions tab and set your actions.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
closes, and the action is assigned.
LeCroy Corporation
441