Device Libraries - LeCroy Sierra M6-2 User Manual

LeCroy Corporation
By selecting the TestCasesForSATA.infbd file, you get an additional library window with
predefined SATA test cases, similar to the following:
Figure 4.13: Test Cases for SATA Library

Device Libraries

In addition to general libraries, the application defines device libraries. Each device library
is associated with a specific InFusion device. Each device library opens in a separate
Device Library window and holds up to ten InFusion scenarios for the device. When you
connect to the device and click the entry for that device in the Device List, the device
library for the device opens automatically.
The scenarios that appear in the device library are those currently stored on the
corresponding device. They were uploaded from the device to your PC when you opened
the device library. You can click any of the scenarios listed to open it for editing. When
you are finished with your edits, you can use the buttons on the Device Library toolbar to
download the revised scenario to the device.
The None scenario is an empty and undefined scenario to allow you to assign port(s) to
None.
The Multiport feature allows you to run a scenario by more than one port in a
Device Library and to assign different ports to different scenarios and run them together.
Each scenario in a library can run by more than one port.
328 S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Scenario Libraries