LeCroy Sierra M6-2 User Manual page 434

LeCroy Corporation
Setting
SATA Link Init Settings
OOB_SATA_D102_Time
OOB_SATA_Align_Time
SAS Speed Negotiation Settings
OOB_SAS_Align1_Time
OOB_SAS_Align0_Time
OOB_SAS_Interspeed_Time 750000
OOB_SpeedNeg_MTT.
OOB_SpeedNeg_SNTT.
OOB_SpeedNeg_BCT.
432
Default
Value Description
100000 D10.2 time for SATA link synchronization in
OOBIs.During the specified period, the generator will
transmit D10.2 symbols.
100000 ALIGN(0) time for SATA link synchronization in
OOBIs.During the specified period, the generator will
transmit ALIGN(0) primitives.
81920 ALIGN(1) time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
transmit ALIGN(1) primitives.
81920 ALIGN(0) time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
transmit ALIGN(0) primitives.
Interspeed time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
keep the line at electric idle.
29998080 The maximum time in OOBI during which training
OOBI phase of speed negotiation should be completed in
Train‐SNW.
2200 The time in OOBI during which generator transmits
OOBI phy capability bits in SNW‐3. In Automatic
connection This value is also used for the time during
which generator sends Align0 and Align1 in SNW1
and SNW2.
2200 The time in OOBI during which generator transmits
OOBI COMWAKE or D.C. idle during SNW‐3.
Sierra Trainer Generation Commands
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual