Target and Device Emulation
Power Management Settings Tab
Figure 2.193: Power Management
1. In the Host Initialized Power Management area, choose whether to support the
2. Specify the response type for PMREQ_P and PMREQ_S, the delay, and Minimum
3. In the Device Initiated Power Management area choose whether to support the
4. Define start event by choosing Standby timer expires, STANDBY command
5. Specify time for Abandon request and Wake up after and enter the Standby timer
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
report in the Identify page.
Number of Response Primitives.
report in the Identify page.
executes, or Link layer remains in IDLE state more than [XXX] ms.
interval.
LeCroy Corporation
187