Table of Contents
Advertisement
LeCroy Corporation
Generate Menu
Start Generation: Causes the Generator to begin generation.
Stop Generation: Causes the Generator to stop generation.
Resume Generation: Causes the Generator to resume generation after a stop.
Connect Link: Automatically bring the linkup to the Host, Device, Initiator, or Target
connected to the Generator.
Disconnect Link: Disconnect link.
Connect Parameters: Set the "Identify" frame parameter settings to keep the link
connected. See
Generation Options: Setup the Generation Rules. See
437.
Figure 5.4: Trainer Generate Menu
Search Menu
Go to Event: Opens a dialog that allows you to go to a frame and time.
Figure 5.5: Go to Event Dialog
Go to Marker: Positions the display to the selected marked packet.
380
"Connection Parameters" on page
457.
"Generation Options" on page
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Sierra Trainer Menus
Advertisement
Table of Contents
