Saving A Trace Capture - LeCroy Sierra M6-2 User Manual

LeCroy Corporation
You can hide any layer by clicking the corresponding Show/Hide button on the menu bar.
The system retains all captured data, but the display has only some data layers for simpler
viewing.
You can configure the viewer display for test and viewing preferences
Display" on page 191.
The Analysis Project dialog offers you a comprehensive set of choices to create a trigger
and capture project satisfying some specific need. You can set the Analyzer to:

Saving a Trace Capture

You can save a Trace Capture for review at a later time using the Save As dialog.
Figure 2.6: Save As Dialog
46
for details about configuring the viewer display).
Capture specific patterns (see

Capture different patterns pre‐ and post‐trigger.

Exclude parameters from capture.

Trigger on a pattern or sequence of patterns (see

Configure trace capture memory (Settings tab).

Select file to save trace capture in memory (Settings tab).

Include a project note (Notes tab).

"Patterns and Data Capture Setup" on page
"Trigger Setup" on page
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Saving a Trace Capture
(See "Viewer
56).
71).