Table of Contents
Advertisement
LeCroy Corporation
Choose Target Emulator Port
Click a port option button, then click the Speed Negotiation Setting button (see
Negotiation Tab" on page
Ports Configuration
Click the Port Configuration button to display the Ports Configuration dialog (see
Configuration" on page
Device Activation
Enter a number of times in the Activate Device field. If Activate Device = 1, the software
activates Target Emulator until you deactivate it. This is the default behavior. (Period of
Activation has no effect.)
If Activate Device = n, where n > 1, the software activates and deactivates
Target Emulator n times, with activation period specified in the period of activation field.
For example, if Activate Device = 10 and period of activation = 2000 ms, the software
activates Target Emulator for 2000 ms and then deactivates it, and then repeats
activation and deactivation 9 times, for a total of 10 times. (You must enter Period of
Activation.)
Advanced Settings
Click the Advanced Button to display additional setting options. The dialog opens
displaying the OOB Signal Setting tab.
OOB Signal Setting
Edit the default values displayed in the white editable fields.
Figure 2.187: OOB Signal Setting Dialog
182
143). Select the port speed settings, all by default.
97).
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Target and Device Emulation
"Speed
"Ports
Advertisement
Table of Contents
