Table of Contents
Advertisement
LeCroy Corporation
Example 4: Multiple Triggers and Actions
In this example, the Global Rules area of the scenario waits for two events, each of which
triggers a different action.
1. Click the New Scenario button in the main library or one of the device libraries. In
2. As you did in example 2, choose RRDY (Normal) as the first event to monitor, and
3. In the Global Rules area, click the prompt to add the next event (keep in mind this is
Figure 4.29: Example 4: Entering Second Event
In this example, there is a parallel set of events, but each event is associated with its own
action. In a combined event, there is a parallel set of events sharing the same action.
4. Using the drop‐down menu, choose RRDY (Reserved 0) as the second event to
5. Click OK to close the Event Properties dialog box.
6. In the Global Rules area, click the prompt to add an action to be triggered by the
348
the Scenario Properties dialog, enter the scenario name, description, and direction
of traffic change.
substitute with the SAS primitive ERROR as action.
not a combined event).
The Event Properties dialog box appears.
monitor.
RRDY (Reserved 0).
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Creating Global Rules
Advertisement
Table of Contents
