Table of Contents
Advertisement
Exercise and Capture
Add Wait for Power Management (SATA only)
Insert this instruction and select PM_ACK or PM_NAK. Set an expiration time and a label
for the Goto. This instruction causes the emulator to go to the specified label if any frame
occurs prior to the expiration time. If the expiration time occurs first, the emulator goes
to the next step.
Figure 2.109: SATA: Wait for Power Management
Insert Delay
To delay program execution, insert a Delay instruction. Enter the delay value
(in microseconds) in the number text box to define a delay.
Figure 2.110: Delay
Add Stop
To define the end of the Initiator Emulator program, insert the Stop Initiator Exerciser
instruction.
Figure 2.111: Stop
Add a Label
Add a label to any command, to use for conditional and unconditional jumps. Click the
command to label, and insert the Label instruction. You can also insert a label by right‐
clicking a command and choosing Add Label.
Figure 2.112: Label
Labels are automatically labeled as Label# sequentially as they are added. However, you
can assign them meaningful names such as STOP and START.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
121
Advertisement
Table of Contents
