Selectable Filter Options For Sas - LeCroy Sierra M6-2 User Manual

Filtering
.
Figure 3.50: Third Level of Multilevel Filtering
Filter descend packets by ascend packet
You can apply a filter on a descend packet if you check the Filter descend packet if ascend
packet is filtered option. If you uncheck this option, the software only filters the filtered
packet. For example, if this option is checked and any SCSI command is selected, all
transport and link packets of this command are filtered,. If you unchecked this option,
only selected SCSI commands are filtered.

Selectable Filter Options for SAS

The SAS Filter Options are:
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Bus Condition

Primitive

Incomplete Frames

Address Frames

SSP Frames

SMP Frames

STP Frames

SCSI Commands

Task Management Functions

ATA Commands

SCSI Command Status (see

Source SAS Address

"Filter Check Condition" on page
LeCroy Corporation
229).
227