Table of Contents
Advertisement
Software Settings
Other
Switch to CATC Navigation: Packet view will open in CATC mode.
Reverse Link Data: The software shows DWORDs of link data as reversed.
Pack Repeated Primitives: The software packs repeated primitives just after opening a
sample file.
Cancel button kills upload immediately: The software kills the uploading process if you
press Cancel.
Close previous sample file when new sample file opens: When you want to open a new
sample file, the software closes any open sample files.
Create statistical report read/write page: The software creates a Read/Write page in the
statistical report. Enabling this setting displays the Read/Write Stream DMA command in
the Read/Write page.
Spread Sheet View Tab
Figure 3.79: SATA: Software Settings Dialog Spread Sheet View Tab
The SAS Software Settings dialog has the same options, except that it does not have
"Show 'Sector Count' instead of 'Xfer Length".
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
255
Advertisement
Table of Contents
