Table of Contents
Advertisement
USB Protocol Suite User Manual
2.8 USBTracer System Setup
The USBTracer module inserts into the Universal Protocol Analyzer System. The UPAS
connects to a desktop or laptop PC through a USB port. The PC controls the UPAS and
Analyzer.
To set up the system hardware:
2.9 USBTracer/Trainer Specifications
USBTracer is a hardware module that installs into the Universal Protocol Analyzer
System. The following specifications describe a combined USBTracer/Universal Protocol
Analyzer System.
2.9.1 Package
UPAS
USBTracer Plug-in
2.9.2 Connectors
UPAS
2.9.3 Weight
UPAS
USBTracer Plug-in
2.9.4 Power Requirements
90 to 254 VAC, 47 to 63 Hz (universal input), 100 W maximum
LeCroy Corporation
•
Insert the USBTracer module into the UPAS.
•
Connect the Analyzer to an AC power source.
•
Connect to the analyzing PC with USB.
•
Connect USB cable to the device under test.
12.2 x 12.2 x 3.5 inches
(31.1 x 31.1 x 8.9 cm)
4.5 x 6.7 x 1.3 inches
(11.3 x 17.0 x 3.2 cm)
AC power connection
External trigger connection
Host connection (USB, type B)
7.5 lb. (3.4 kg)
1.0 lb. (0.5 kg)
Chapter 2: General Description
35
Advertisement
Table of Contents
