LeCroy Corporation
FIS (Frame Information Structure) (SATA only)
Double‐click FIS to open the FIS Type selection dialog.
Figure 2.56: SATA: FIS Type Dialog
SAS vs. SATA: Not available in SAS.
Click the down arrow next to the Type drop‐down list box, choose a FIS type on which to
trigger, and click OK. Repeat for additional types.
Available FIS Types:
Note:
You cannot trigger on a Vendor FIS.
86
Register Host to Device
Register Device to Host
Set Device Bit
DMA Activate
Any Type
DMA Setup
BIST
PIO Setup
Data
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Trigger Setup