Initiator Setting Tab (Sas Only) - LeCroy Sierra M6-2 User Manual

Exercise and Capture
Additionally check:
No WTRM
Code Violation on SATA primitive
Disparity error on SATA primitive
Ignore XRDY/RRDY sequence
Delay in HOLD response (in sending HOLDA)

Initiator Setting Tab (SAS only)

The Initiator Setting tab allows you to select the Port(s) for generating SAS traffic and to
specify SAS Address, Data Frame Payload size, Frame Receive Timeout, Logical Block size,
and ATA Command Execution Time out.
You can run a Pattern Generator. To run the Pattern generator, check the Run Pattern
Generator option button and select a Pattern Generator File. You can create Pattern
Generator Files (See "Creating a Pattern Generator File" on page 461.).
Figure 2.139: SAS: Initiator Setting Tab
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
139