Table of Contents
Advertisement
Trigger Setup
FIS Pattern (SATA only)
Double‐click FIS Pattern to open the FIS Pattern selection dialog.
Figure 2.57: SATA: FIS Pattern Dialog
SAS vs. SATA: Not available in SAS.
The FIS Pattern dialog opens with the default FIS Type Register Host to device. To choose
another available FIS Type, click the down arrow next to the FIS Type list box.
Figure 2.58: SATA: FIS Pattern Dialog Choices
SAS vs. SATA: Not available in SAS.
Choose an FIS Type and complete the corresponding dialog.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
87
Advertisement
Table of Contents
