Target and Device Emulation
Setting General Errors
Generate Periodic Error
Generate Periodic Error allows you to inject periodic error on Command frame, FIS frame,
stand alone primitive, and stand alone FIS. Check Generate Periodic Error and select the
period unit of time, number of IO commands, or number of kilobytes transferred, by
checking the corresponding option button.
Outgoing FIS Command Error or Outgoing Frame Command Error
SAS: Check Generate Error on outgoing FIS commands, then click the Setting button to
open the error setting dialog.
Figure 2.170: SAS: Outgoing FIS of Command Error Setting
SATA: Check Generate Error on outgoing frame commands, then click the Setting button
to open the error setting dialog.
Figure 2.171: SATA: Outgoing FIS of Command Error Setting
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
165