Table of Contents
Advertisement
User‐Defined Decoding
Figure 3.91: SAS IP Setup Success Message
After you see the Warning Message, click Yes
After you see the Success Message, click OK.
Note:
You can also click Reset.
User-Defined Decoding
User‐defined decoding allows you to create a definition file to interpret commands and
frames that are not in the standard set recognized by the software.
Select Configuration > User Defined Decoding to open the User Defined Decoding dialog.
Figure 3.92: SAS: User Defined Decoding
SAS vs. SATA: SAS adds SCSI Commands, SSP Frames, and SMP Frames.
Check ATA Commands and/or STP frames. Click the ellipses next to a command type text
box to display the Open dialog. Choose an appropriate script file and click Open.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
267
Advertisement
Table of Contents
