Statistical Report Content
Bus Condition Report
To display the Bus Condition Report, click the Bus Condition tab. The Bus Condition
Report displays information in the following columns.
Figure 3.101: Bus Condition Report
ATA Command Report
To display the ATA Command Report, click the ATA Command tab. The ATA Command
Report displays information in the following columns:
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Bus Condition: All, Custom, Activity On, COMININT/COMRESET, COMSAS, COM‐
WAKE, Keep Alive Activity
Direction: All, H‐>D, D‐>H, I‐>T, T‐>I, or Custom
Count: All, Custom, or a number of occurrences
%: of total count
Command: All, Custom, Check Power Mode, Execute Device Diagnostic,
Flush Cache, Identify Device, Read DMA Ext, Read FPDMA Queue, Set Feature,
Write DMA Ext, Write FPDMA Queue
PM Port
Direction: All, H‐>D, D‐>H, I‐>T, T‐>I, or Custom
Number of FIS: All, Custom, or a number
Payload Size: All, Custom, or a number of DWORDs
Status: All, Custom, Incomplete, Normal Output
Timeout: such as All, Custom, N/A, Yes and No (see
Report" on page
274)
Duration: All, Custom, or time unit
Count: All, Custom, or a number of occurrences
LeCroy Corporation
"Time out of ATA Command
273