Ata Command - LeCroy Sierra M6-2 User Manual

Trigger Setup
ATA Command
Double‐click ATA Command in the Pattern window to open the ATA Command Pattern
dialog.
Figure 2.47: SAS: FIS Pattern Dialog
SAS vs. SATA: SATA Dialog has different dropdown options.
Click the down arrow next to the Command dropdown list, scroll the list to choose a
command to trigger on, and click OK.
A powerful triggering choice is Any Command, which causes the analyzer to trigger on
any ATA command.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
77