Table of Contents
Advertisement
Scenario Batch Files
1. First, click Click here to add script command to open the Command Properties
The Command Parameters Dialog contains the list of available commands and their
parameters from which to build scenarios and connected hardware and available ports.
2. Select appropriate parameters for the command and click OK to display the script in
Note:
You can select ports from the port list, depending on number of ports licensed.
Note:
The hardware Serial Number can already exist or not. If the Serial Number exists, the Serial
Number (for example, S/N: 12871) is shown. In Offline and Simulation mode, you can enter a
Serial Number. In Online mode, you can only enter an existing Serial Number.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
dialog.
the Script Workspace.
LeCroy Corporation
369
Advertisement
Table of Contents
