LeCroy Corporation
Figure 4.21: Using a Captured Data DWORD in Substitute DWORD Test Action
Summary of Scenario Creation
The suggested process of creating and executing a scenario is as follows:
1. Create a scenario in the main library.
2. Copy the scenario from main library to a device library by drag‐and‐drop with a
3. Download all scenarios in the device library to a InFusion device.
4. Select the scenario in the device library that you want to run on the device.
5. To run the scenario, click the Start Scenario button from the Device Library toolbar.
Note:
Step 1 is described in detail for each example in following sections. Steps 2 to 5 are described in
detail at the end of this chapter.
340
mouse. (Each device library is associated with a specific InFusion device.)
The device starts to monitor/modify traffic.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Scenario Actions