LeCroy Corporation
Project Settings
Set project settings in the Project Settings tab
Note:
When using the Exerciser, channel 2 is not available and is grey.
Creating a Data Block
You can create the following types of data blocks, for use with data fields:
To create a data block, click the
or select Configuration > Data Block to open the Data Block dialog box as shown in
Figure 2.152.
Figure 2.152: Default Data Block Dialog Box
150
Random data pattern
Custom data pattern specifically for your application
Counter data pattern
Walking bit pattern
(See "Project Settings" on page
Default Data Block button on the Main toolbar,
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Exercise and Capture
92.).