Saving Display Options - LeCroy Sierra M6-2 User Manual

LeCroy Corporation
Check boxes to allow a field when the selected header is collapsed. Example header fields
are:
You can move items up and down.
You can select to Restore Defaults for the selected header or all headers.

Saving Display Options

You can save a set of Display Options values, make a set the default settings, or use a
saved set of values with the commands at the bottom of the Display Options window:
456
STP DMA Setup FIS

STP BIST Activate FIS

STP PIO Setup Device to Host FIS

STP Data FIS

STP Frame Summary Header

SATA Frame Summary Header

SAS Delta Time

Frame Type

Function

Result

Offset

FIS Type

To save the current Display Options values in an options file for use in future ses‐

sions, click Save. Enter a file name without a file name extension. The program
adds the .opt extension. (The file must have an .opt file name extension.)
To load a previously saved .opt file, click Load and select a file name.

To save the current Display Options values in the default.opt options file for use

as the default display options, click Save as Default. (Do not delete the
default.opt file.)
To apply the current Display Options values, click Apply. The Display Options

window remains open.
To apply the current Display Options values and close the Display Options win‐

dow, click OK.
To cancel unsaved changes to display values and exit the Display Options win‐

dow, click Cancel.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Display Options