Primitive Category - LeCroy Sierra M6-2 User Manual

LeCroy Corporation

Primitive Category

418
ALIGN: 0, 1, 2, or 3

NOTIFY: ENABLE SPINUP, RESERVED 0, RESERVED 1, or RESERVED 2

ACK

NAK: CRC ERROR, RESERVED 0, RESERVED 1, or RESERVED 2

RRDY: NORMAL, RESERVED 0, RESERVED 1

AIP: NORMAL, RESERVED 0, RESERVED 1, RESERVED 2, RESERVED 3, WAITING

ON CONNECTION, WAITING ON DEVICE, or WAITING ON PARTIAL
BREAK

CLOSE: CLEAR AFFILIATION, NORMAL, RESERVED 0, RESERVED 1

CREDIT BLOCKED

OPEN ACCEPT

OPEN REJECT: BAD DESTINATION, CONNECTION RATE NOT SUPPORTED, NO DES‐

TINATION, PATHWAY BLOCKED, PROTOCOL NOT SUPPORTED, RESERVED ABAN‐
DON 0, RESERVED ABANDON 1, RESERVED ABANDON 2, RESERVED ABANDON 3,
RESERVED CONTINUE 0, RESERVED CONTINUE 1, RESERVED INITIALIZE 0,
RESERVED INITIALIZE 1, RESERVED STOP 0, RESERVED STOP 1, RETRY, STP
RESOURCES BUSY, or WRONG DESTINATION
BROADCAST: CHANGE, RESERVED 0, RESERVED 1, RESERVED 2, RESERVED 3,

RESERVED 4, RESERVED CHANGE 0, or RESERVED CHANGE 1
DONE: ACK/NAK TIMEOUT, CREDIT TIMEOUT, NORMAL, RESERVED 0, RESERVED

1, RESERVED TIMEOUT 0, or RESERVED TIMEOUT 1
SATA FLOW CTRL PRIMITIVE

SATA IDLE PRIMITIVE

SAS PS PRIMITIVE: PS_REQ_PARTIAL, PS_REQ_SLUMBER, PS_ACK, or PS_NAK

Sierra Trainer Generation Commands
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual