LeCroy Sierra M6-2 User Manual page 159

Performance Analysis
Note:
When you use the Exerciser, channel 2 is not usable and is greyed out.
Figure 2.161: SATA: Performance Analysis Definition
Choose Protocol (SAS only)
Check the protocol check box(es) to select the protocol category:
Analyzer Port
Check the Analyzer Port(s) to include in the performance calculation.
Link
Check the Link(s) to include in the performance calculation.
STP Port
Enter the STP port number for the STP port to include in the performance calculation.
SAS Source Address (SAS only)
Enter a SAS Source Address to include in the performance calculation.
SAS Destination Address (SAS only)
Enter a SAS Destination Address to include in the performance calculation.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
SSP for SCSI Commands

STP for SATA Commands

SMP for Management Commands

Address Frame for Open and Identify

LeCroy Corporation
157