LeCroy Sierra M6-2 User Manual page 142

LeCroy Corporation
Choose Initiator Emulator Port
For each port, select a speed, and then click the Speed Negotiation Setting button.
Figure 2.140: SAS: PHY Setting Dialog
Select the port speed settings (see
After you click OK, you can Enable Muxing On.
Pattern Generator
You can select a Pattern Generation file.
Initiator Emulator
You can run an Initiator Emulator while setting:
Check Autostop exerciser when Analyzer Stopped to halt the Initiator Emulator when
the Analyzer stops. If unchecked, the Exerciser continues to run even after the Analyzer
stops.
140
Auto stop exerciser when Analyzer stops

SAS Address

Data Frame Payload Size

Frame Receive Timeout

Logical Block Size

ATA Command Execution Timeout

Send NOTIFY ENABLE SPINUP primitive

"PHY Setting Dialog" on page
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Exercise and Capture
118).