Tx Vout - LeCroy Sierra M6-2 User Manual

Tx Vout

Tx Vout
The analyzer incorporates the ability to select TX Vout for the transmitter on each port.
Selecting TX Vout increases the output voltage swing above the nominal value, for test
and characterization purposes. This feature is also useful to compensate for line loss
when driving long cables.
To select TX Vout, select Configuration > Tx Vout & Preemphasis to display the 
Rx/Tx Settings dialog.
Figure 3.76: Choose Port for TX Vout
Copy Selected Port Settings to All Ports implements one port's setting into all other port
settings.
Restore Factory Settings restores default values.
Save saves the new values as a *.sng file.
Load loads back the saved *.sng file.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
251