LeCroy Sierra M6-2 User Manual page 323

Port Configuration for InFusion
Important Information for Jammer and Analyzer
Jammer intercepts and delays traffic on both directions simultaneously, so Host sends to
Jammer, Jammer delays and sends to Host, Device sends to Jammer, Jammer delays and
sends to Device. However, Jammer modifies traffic in one direction only: from Host to
Device, or from Device to Host.
When using Jammer and Analyzer, the Select Port Configuration dialog has options JA as
shown in Figure 4.6.
Figure 4.6: Select Port Configuration Options with Jammer and Analyzer
The following figures illustrate the available setup options.
Figure 4.7: Jammer and Analyzer with Analyzer after Jammer
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
JA (After Jammer): Analyzer captures Jammer to Host and Jammer to Device.

Analyzer is after Jammer on both paths. See Figure 4.7: .
LeCroy Corporation
321