LeCroy Sierra M6-2 User Manual page 34

LeCroy Corporation
To remove an expansion card, follow these steps:
1. Unplug the system from AC power and turn the system so the expansion port is
2. Insert the extraction‐tool prongs into the holes in the expansion card panel.
Note:
If the prongs do not slip easily into the holes, use a small nail file or similar device to remove
paint from the prongs.
32
facing you. Note the two retaining screws and the holes for the extraction tool that
are located on the panel of the expansion card.
Holes in the
Expansion Card
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Expandability