Table of Contents
Advertisement
LeCroy Corporation
Port configuration depends on the application you run.
Sierra M6‐2 can have Analyzer and Trainer or Analyzer and Jammer on same port.
Note:
To display the current Port Configuration, click the green button in the lower right corner to
display the Port Status window (see
Port Configuration and Projects
Port Configuration depends on Project selected.
Performance Analyzer and
Protocol Analyzer, Protocol Analyzer with Initiator Emulator, and Target Emulator can
have the following port configurations.
Analyzers work with Emulators, Jammer, and Trainer (see below).
One Initiator Emulator can work by itself or work with one Analyzer.
98
To act as Analyzer, select the
To activate a Target Emulator on a port, select the
TargetEmulator port configuration.
To activate the Initiator Emulator on a port and run the Analyzer on the same
port, select
To activate the InFusion on a port, select
To activate the Trainer on a port, select
Performance Analyzer with Initiator Emulator do not use ports.
Project
Number
One analyzer
and/or
one emulator
Protocol Analyzer Port 1.
Protocol Analyzer
Port 1.
with Initiator
Emulator
Pair on Port 1.
Target Emulator
Port 1.
Pair on Port 1
Analyzer port configuration.
InitiatorEmulator/Analyzer.
"Port Status" on page
Two analyzers
and/or
two emulators
One analyzer each on
1 and 2.
One analyzer each on
Port 1 and Port 2.
One emulator each on
Port 1 and Port 2.
One emulator each on
Port 1 and Port 2.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Jammer.
Trainer.
214).
Trigger Setup
Advertisement
Table of Contents
