LeCroy Corporation
Adding a User-Defined ATA Command
Click the Insert ATA Command button and choose User Defined. This enters an
ATA command line with editable fields to define your own custom command.
Figure 2.90: Insert ATA Command
Adding a SCSI Command (SAS only)
Click the Insert SCSI Command button, click one of the command categories, and choose
a command.
Figure 2.91: SAS: SCSI Dropdown List
The following menu options are available:
112
MMC6
SBC3
SMC3
SPC4
SSC2
OSD2
ADC3
User Defined
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Exercise and Capture