Export To Generator; Export Read/Write Command Report - LeCroy Sierra M6-2 User Manual

Exporting

Export to Generator

From the File menu, you can Export to Generator, using the Export to Generator dialog.
Figure 2.9: Export to Generator Dialog
You can limit the range of the saved file. You can save:
You can import SSP Frames, SMP Frames, or STP Frames (see
Properties" on page
You can Insert Waits (see
You can use Auto Alignment (see
You can select the Port (see
In the Project Name, enter a valid generator file.
Note:
The resulting Trainer Generation file cannot exceed 2 MB or 1,000,000 packets.

Export Read/Write Command Report

From the File menu, you can Export Read/Write Command Report as an Excel file, using
the Save As dialog.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
x.ssg
All Samples

Range between selected cursors

Range between ATA Commands or Transport

443).
"Wait Commands" on page
"The Global Setting "AutoAlign"" on page
"Setup Menu" on page
LeCroy Corporation
"Events and Event
419).
379).
390).
49